MONG: Monitoring Installations and Instruments

• Class: Samples, Amalgamated Specimens and Laboratory Test Scheduling

Heading	Unit	Type	Example	Description
LOCA_ID		ID	327-16A	Location identifier
MONG_ID		X	P1	Monitoring point reference
MONG_DIS	m	2DP	2.3	Initial distance of monitoring point from LOCA_ID
PIPE_REF		X	Pipe1	Pipe reference
MONG_DATE	yyyy-mm-dd	DT	01/01/2003	Installation date
MONG_TYPE		PA	TS	Instrument type
MONG_DETL		X	Total Station	Details of instrument
MONG_TRZ	m	2DP	5.5	Distance to start of response zone from LOCA_ID datum
MONG_BRZ	m	2DP	7.5	Distance to end of response zone from LOCA_ID datum
MONG_BRGA	deg	0DP	90	Bearing of monitoring axis A (compass bearing)
MONG_BRGB	deg	0DP	180	Bearing of monitoring axis B (compass bearing)
MONG_BRGC	deg	0DP	270	Bearing of monitoring axis C (compass bearing)
MONG_INCA	deg	0DP		Inclination of instrument axis A (measured positively down from horizontal)
MONG_INCB	deg	0DP		Inclination of instrument axis B (measured positively down from horizontal)
MONG_INCC	deg	0DP		Inclination of instrument axis C (measured positively down from horizontal)
MONG_RSCA		X	Displacement to East +ve	Reading sign convention in direction A
MONG_RSCB		X	Displacement to South +ve	Reading sign convention in direction B
MONG_RSCC		X	Displacement up +ve	Reading sign convention in direction C
MONG_REM		X	Behind wall	Remarks
MONG_CONT		X	ACME Instruments Ltd	Contractor who installed monitoring instrument
FILE_FSET		X	FS27	Associated file reference (eg equipment calibrations)

Notes - 3

• Each monitoring point should have a unique identification detailed in MONG_ID. Typically this reflects the actual reference or marking on the instrument.
• MONG_DETL should be used to describe the instrument/sensor location or parameter in specific terms.
• MONG_CONT used to include details of which organisation installed the monitoring device.